Explosion-proof cable glands KNETV are certified for application in conduit systems with all types of non-armored cables and cables with wire mesh braid (in case when the sealing is made on the outside diameter of cable and wire braid is insulated inside the equipment).
Explosion-proof cable glands of KNETV series are completely new Russian products (Patent No. 155936, rightholder "ZAVOD GORELTEX" Co. Ltd. ), operating characteristics of which significantly surpass Russian and foreign analogues.
Increased wall thickness of bodies of GORELTEX cable glands considerably enhances their strength compared with cable glands of other manufacturers.
Explosion-proof cable glands KNETV are applied in rigid and flexible conduits ensuring explosion-proof sealing of the cable sheath and environmental protection at the same time.
The most important development is the use of one sealing ring for the whole range of diameters of crimped cable, which reliably crimps the incoming cable and ensures Exe type of protection. One sealing ring for the whole diameter of crimped cable makes the mounting of cable into cable gland significantly easier. This excludes error when choosing a right ring to crimp the required cable diameter, which can result in incomplete crimping and subsequent pulling out of cables.
Explosion-proof cable glands KNETV are fully compatible with the equipment with Exe, ExnR, Exia marking. Cable glands are manufactured according to the technology of "ZAVOD GORELTEX" Co. Ltd. .
Scope of application – outdoor and indoor hazardous areas as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996), dangerous production facilities of I, II, III, IV hazard class supervised by Rostechnadzor of the RF and national technical supervision bodies of the Customs Union and CIS countries.
Cable gland dimension type | Type of thread | Dimensions, mm | Diameter of crimped cable, d mm | Mass, kg | all files |
||||
Main | Alternative | M1, |
M2, |
АС | ØM | С | |||
KNETV1M | A2FXRF20/1I | M20x1,5 | M20x1,5 | 27 | 30 | 62 | 6 - 14 | 0,14 | |
KNETV2М | A2FXRF25/2I | M25x1,5 | M25x1,5 | 30 | 33,5 | 65 | 14 - 20 | 0,14 | |
KNETV3М | A2FXRF32/3I | M32x1,5 | M32x1,5 | 39 | 44 | 68 | 19 - 27 | 0,23 | |
KNETV4М | A2FXRF40/4I | M40x1,5 | M40x1,5 | 45 | 50 | 66 | 26-33 | 0,29 | |
KNETV5М | A2FXRF50/5I | M50x1,5 | M50x1,5 | 56 | 62 | 75 | 32-41 | 0,5 | |
KNETV6М | A2FXRF63/6I | M63x1,5 | M63x1,5 | 70 | 76 | 84 | 39-49 | 0,81 |
Cable gland dimension type | Type of thread | Dimensions, mm | Diameter of crimped cable, d mm | Mass, kg | all files |
||||
Main | Alternative | M1, |
M2, |
АС | ØM | С | |||
KNETV1MG | A2FXRF20 | M20x1,5 | 1/2" | 27 | 30 | 65 | 6 - 14 | 0,14 | |
KNETV2MG | A2FXRF25 | M25x1,5 | 3/4" | 30 | 33,5 | 67 | 14 - 20 | 0,14 | |
KNETV3MG | A2FXRF32 | M32x1,5 | 1" | 39 | 44 | 74 | 19 - 27 | 0,26 | |
KNETV4MG | A2FXRF40 | M40x1,5 | 1 1/4" | 45 | 50 | 73 | 26-33 | 0,3 | |
KNETV5MG | A2FXRF50 | M50x1,5 | 1 1/2" | 56 | 62 | 78 | 32-41 | 0,51 | |
KNETV6MG | A2FXRF63 | M63x1,5 | 2" | 70 | 76 | 86 | 39-49 | 0,82 |
Cable gland dimension type | Type of thread | Dimensions, mm | Diameter of crimped cable, d mm | Mass, kg | ||||
Main | Alternative | M1, NPT | M2, |
АС | ØM | С | ||
KNETV1NM | A2FXRF1 N/1I | 1/2" | M20x1,5 | 27 | 30 | 68 | 6 - 14 | 0,12 |
KNETV2NM | A2FXRF2N/2I | 3/4" | M25x1,5 | 30 | 33,5 | 70 | 14 - 20 | 0,13 |
KNETV3NM | A2FXRF3N/3I | 1" | M32x1,5 | 39 | 44 | 78 | 19 - 27 | 0,22 |
KNETV4NM | A2FXRF4N/4I | 1 1/4" | M40x1,5 | 45 | 50 | 79 | 26-33 | 0,33 |
KNETV5NM | A2FXRF5N/5I | 1 1/2" | M50x1,5 | 56 | 62 | 85 | 32-41 | 0,45 |
KNETV6NM | A2FXRF6N/6I | 2" | M63x1,5 | 70 | 76 | 95 | 39-49 | 0,82 |
Cable gland dimension type | Type of thread | Dimensions, mm | Diameter of crimped cable, d mm | Mass, kg | ||||
Main | Alternative | M1, |
M2, |
АС | ØM | С | ||
KNETV1NG | A2FXRF1N | 1/2" | 1/2" | 27 | 30 | 65 | 6 - 14 | 0,12 |
KNETV2NG | A2FXRF2N | 3/4" | 3/4" | 30 | 33,5 | 70 | 14 - 20 | 0,13 |
KNETV3NG | A2FXRF3N | 1" | 1" | 39 | 44 | 81 | 19 - 27 | 0,24 |
KNETV4NG | A2FXRF4N | 1 1/4" | 1 1/4" | 45 | 50 | 80 | 26-33 | 0,35 |
KNETV5NG | A2FXRF5N | 1 1/2" | 1 1/2" | 56 | 62 | 88 | 32-41 | 0,47 |
KNETV6NG | A2FXRF6N | 2" | 2" | 70 | 76 | 97 | 39-49 | 0,83 |
RKN type | Name of metal hose | Inside diameter of metal hose, mm | Diameter of KNETV male thread, G cylindrical pipe thread GOST 6357-81 |
RKN12 | RZ-TSKH-12, MRPI-12 | 12 | 1/2" |
RKN15 | RZ-TSKH-15, MRPI-15 | 15 | 1/2" |
RKN16НК | GERDA-MG-16 | 16 | 1/2" |
RKN20+AB-2GВ-1GН | RZ-TSKH-20, MRPI-20 | 20 | 1/2" |
RKN20 | RZ-TSKH-20, MRPI-20 | 20 | 3/4" |
RKN22НК | GERDA-MG-22 | 22 | 3/4" |
RKN25+AB-3GВ-2GН | RZ-TSKH-25, MRPI-25 | 25 | 3/4" |
RKN25 | RZ-TSKH-25, MRPI-25 | 25 | 1" |
RKN25НК | GERDA-MG-25 | 25 | 1" |
RKN32+AB-4GВ-3GН | RZ-TSKH-32, MRPI-32 | 32 | 1" |
RKN32 | RZ-TSKH-32, MRPI-32 | 32 | 1 1/4" |
RKN35НК | GERDA-MG-35 | 35 | 1 1/4" |
RKN38+AB-5GВ-4GН | RZ-TSKH-38, MRPI-38 | 38 | 1 1/4" |
RKN38 | RZ-TSKH-38, MRPI-38 | 38 | 1 1/2" |
RKN40НК | GERDA-MG-40 | 40 | 1 1/2" |
RKN50+AB-6GВ-5GН | RZ-TSKH-50, MRPI-50 | 50 | 1 1/2" |
RKN50 | RZ-TSKH-50, MRPI-50 | 50 | 2" |
RKN60+AB-7GВ-6GН | RZ-TSKH-60, MRPI-60 | 60 | 2" |
RKN60 | RZ-TSKH-60, MRPI-60 | 60 | 2 1/2" |
RKN75+AB-8GВ-7GН | RZ-TSKH-75, MRPI-75 | 75 | 2 1/2" |
RKN75 | RZ-TSKH-75, MRPI-75 | 75 | 3" |
* In order to connect the metal hoses with different combination of inside diameter and diameter of crimped cable, it is required to use other size of AV adapter.
KNETV | X | Х | Х | Х | Х | / | Х | – TU 3400-007-72453807-07 |
Type of cable gland | ||||||||
Dimension type of thread | ||||||||
Type of thread: Taper inch NPT - N; Metric GOST 24705 - M; Taper pipe GOST 6211-81 - R; Pipe cylindrical GOST 6357-81 - G | ||||||||
Dimension type for male thread* | ||||||||
Type for male thread**: Taper inch NPT - N; Metric GOST 24705 - M; Taper pipe GOST 6211-81 - R; Pipe cylindrical GOST 6357-81 - G |
||||||||
Material of cable gland: Nickel-plated brass - NK, Stainless steel - N | ||||||||
Options, accessories and versions |
* Code of dimension type for male thread shall not be indicated if it coincides with the female one.
**Code of type for male thread shall not be indicated if it coincides with the female one.
Example: