Explosion-proof manual pull stations IP-535-GORELTEX2-A (IP-S-535-GORELTEX)

Explosion-proof manual pull station IP-535-GORELTEX2-A is intended for constant all-day operation (possibility to send alarm signals in fire alarm loops when activating the actuating member) in fire alarm and fire suppression systems as a passive element for operation together with receiving and control devices. 

The pull station may be applied a single element; there is an option of series connection to fire alarm loop of a group of pull stations. Only a signal from one pull station is sufficient to issue the command from central panel for switching on fire extinguishing systems. The pull station may be applied in hazardous areas of 0, 1 and 2 classes according to GOST 30852.9-2002 and GOST 30852.13-2002 (IEC 60079-14:1999).

Indication operation mode (located on the top): constant green light emission – standby mode, intermittent red light emission – actuating mode.

Alarm announcement mode is switched on by pulling out safety pin. Return of the pull station to initial position (standby mode) is carried out by installation of the safety pin to its proper location using a special tool (flat blade screwdriver). The pull station may be switched to alarm loop with normally closed and normally opened contacts.

 Information letter IP-535-GORELTEX2-А

Full production cycle from foundry patterns to finished products is carried out by explosion-proof equipment plant “ZAVOD GORELTEX” Co. Ltd. in the territory of the Russian Federation.

Scope of application – underground mines and pits non-hazardous with gas (methane), coal dust; outdoor and indoor hazardous areas as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996), areas with presence of combustible dust, as per GOST IEC 61241-3-2011, dangerous production facilities of I, II, III, IV hazard class supervised by Rostechnadzor of the RF and national technical supervision bodies of the Customs Union and CIS countries.

CERTIFICATES

Marking:

1Ex db IIC T6...T5 Gb
0Ex ia IIC T6...T5 Ga
Ex tb IIIC T85°С...T100°С Db
Ex ia IIIC T85°С...T100°С Da

Mining equipment marking:

РН1/РН2

Protection:

IP66/IP67
IK10

Certificates and permits:

ЕАЭС RU C-RU.НА91.В.00189/21

ЕАЭС N RU Д-RU.НВ11.В.07967/20

РОСС RU.НА91Н00019/21

РОСС RU С-RU.МЮ62.В.00062/22

Maritime Register upon request (check cost and terms of Type Approval Certificate issuance with manager)

ЕАЭС RU C-RU.ПБ74.В.00107/20

TU 26.30.50-050-72453807-2017

GOST R ISO 9001-2015 (ISO 9001:2015)

KZ39VEH00005608

TECHNICAL DATA

Ambient temperature, °С:

-60...+75 (Т6/Т85°С)
-60...+90 (Т5/Т100°С)

Operating voltage, V:

9…24

Maximum switching current of reed switch contacts, A:

0,25

Maximum current consumption (at actuation), A:

0,035 (9V)
0,029 (12 V)
0,021 (24 V)

Installed capacity (during actuation) Pinst, W:

0.5

Connection:

Terminals 2.5 mm²

Coating:

Antistatic polymer epoxy coating, frictionally intrinsically safe, resistant to operating environment and ionizing radiation. Red color, RAL 3001

Material:

Modified corrosion-resistant aluminum-silicon alloy, resistant to salt spray and other chemical substances, including hydrogen sulfide and hydrochloric acid fumes, salty and acidic mine waters, frictionally intrinsically safe

Call point class GOST R 53325-2012:

A

Electric shock hazard protection class:

I

Mass, kg:

2

Climatic version:

NF1 (upon request NF2, NF3, NF4, NF5, F1, F2, F3, F5, T1, T2, T3, T5, MU1, MU2, MU3, MU4, W2.1, W5)

DIMENSIONS, OPTIONS, ACCESSORIES, ORDER CREATION

OVERALL AND MOUNTING DIMENSIONS

 

 

OPTIONS, ACCESSORIES AND VERSIONS

ORDER CREATION

Anti-condensation coating

/AP

Ingress protection degree IP67

/IP67

Protective canopy

/KOZYRJOK

Mine normal execution

/RN

FORMATION OF ORDER

IP-535-GORELTEX2-А	-	Х	/	Х	– TU 26.30.50-050-72453807-2017
					Device type
					Cable gland dimension type (max. 3 pcs.)
					Options, accessories and versions

Example: IP-535-GORELTEX2-А-KNV1N-TU 26.30.50-050-72453807-2017.

ADDITIONAL INFORMATION

CONNECTION DIAGRAM OF PULL STATIONS IP-535-GORELTEX2-А TO FIRE ALARM CONTROL PANEL

Connection diagram (parallel connection)

 

Connection diagram (series connection)

 

Selection table

Type of fire alarm control panel	Connection parameters
	Parallel connection (opening)	Series connection (closing)
LB-07	Rd shall ensure current consumption > 15mA, Rok = 2kΩ, Vdоk = KD522	Rd = 11 kΩ, Rоk = 2 kΩ, VDоk = KD522
Luch	Rd = 2.4 kΩ, Rоk = 2.4 kΩ, VDоk = KD521A	Rd = 2.2 kΩ, Rоk = 2.4 kΩ, VDоk = KD521A
PPK-2	Rd = 1.2 kΩ, Rоk = 3.6 kΩ, VDоk = KD521A	Rd = 10.0 kΩ, Rоk = 3.6 kΩ, VDоk = KD521А
Bolid	Rd = 1.5 kΩ (3.0 kΩ - to determine dual actuation), Rоk = 4.7 kΩ, VDоk is not to install	Rd = 8.2 kΩ (4.7 kΩ - to determine dual actuation), Rоk = 4.7 kΩ, VDоk is not to install
Yakhont-16i	Rd = 1.8 kΩ (4.0 kΩ - to determine dual actuation), Rоk = 8.2 kΩ, VDоk is not to install	Not applicable
VERS	Rd = 820 Ω (1.8 kΩ - to determine dual actuation), Rоk = 7.5 kΩ, VDок is not to install	Rd = 10 kΩ (4.7 kΩ - to determine dual actuation), Rоk = 7.5 kΩ. VDоk is not to install

 

Differences between A class and B class manual pull stations

Differences between A class and B class manual pull stations according to GOST R 53325-2012: A class manual pull station (IP-535-GORELTEX1-A, IP-535-GORELTEX2-A) is activated after displacement of indestructible actuating member, which is followed by change of appearance of the pull station.

B class manual pull station (IP-535-GORELTEX1-B) is activated after completing of two actions:

1. provision of access to actuating member by means of destruction or displacement of actuating member, made as A class actuating member;

2. subsequent manual activation of actuating member.

CONFORMITY TO STANDARDS IN RUSSIA

GOST 30852.0-2002 (IEC 60079-0:1998), GOST 30852.1-2002 (IEC 60079-1:1998), GOST 30852.10-2002 (IEC 60079-11:1999), GOST IEC 61241-1-1-2011, Ch. 7.3 PUE, Ch. 7.4 PUE, TR CU 012/2011, RD 5.2-093-2004, GOST R 53325-2009, GOST R IEC 60079-31-2010, GOST 30852.20-2002, GOST 24754-2013