Explosion-proof circuit breaker-disconnector-fuse SHGVA-VRP (CCA-VRP)

+
x
<
>
Explosion-proof circuit breaker-disconnector-fuse SHGVA-VRP (CCA-VRP)PURPOSE AND SCOPE OF APPLICATION

Explosion-proof circuit breaker-disconnector-fuse SHGVA-VRP пare intended for switching, protective disconnection and overcurrent protection of the load in low-voltage circuits in hazardous areas of the facilities of chemical, oil processing, gas and other branches of industry in areas with potentially explosive atmosphere. Explosion-proof circuit breaker-disconnector-fuse SHGVA-VRP are made on the base of SHORVA enclosures.

Operating handle of SHGVA-VRP can be sealed.

DISCONNECTION:

- Disconnection of both outputs of fuse links in circuit breakers of all ratings. Quick-acting mechanism of disconnection independent from the fuses.

- Complete disconnection of power circuits for control and assurance of safety of people and equipment.

- Auxiliary contacts GS1 AN.

- Positive opening of contacts in case of contact welding.

- Clearly visible circuit break between open contacts (visible if the enclosure with window is used).

- Category of application ~23/690 V and 23/500 V.

PROTECTION:

- With fuses type gG (gl).

- With fuses type aM (together with overload heat relay).

- With quick-break fuses.

- Indicator of fuse trip (visible if the enclosure with window is used).

- Conventional maximum short circuit current of 100 kA for circuit breakers of all ratings.

- Breaking capacity of fuses is equivalent to the maximum breaking capacity of disconnector switches.

Full production cycle starting from casting molds and to ready product is performed at the explosion-proof equipment plant “ZAVOD GORELTEX” Co. Ltd. on the territory of the Russian Federation.

Scope of application - hazardous indoor and outdoor areas and mines non-hazardous with gas or dust, in accordance with explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996) and areas hazardous with combustible dust ignition, as per GOST IEC 61241-3-2011, dangerous production facilities of I, II, III, IV hazard classes under supervision of Rostekhnadzor and national supervisory bodies of the CU and the CIS countries.

+
CONFORMITY TO STANDARDS IN RUSSIA
ГОСТ 14254-96 (МЭК 529-89), ГОСТ 30852.0-2002 (МЭК 60079-0:1998), ГОСТ 30852.1-2002 (МЭК 60079-1:1998), ГОСТ 30852.20-2002, ТР ТС 012/2011, ГОСТ IEC 61241-1-1-2011, Гл. 7.3 ПУЭ, Гл. 7.4 ПУЭ, РД 5.2-093-2004, ГОСТ 24754-2013, ГОСТ Р МЭК 60079-31-2010
+
CERTIFICATES
Маркировка взрывозащиты Marking:
1Ex db IIC T6...T4 Gb
Ex tb IIIC T85°С...T135°С Db
Mining equipment marking:
РВ Ex d I Mb
РН1/РН2
Protection:
+
TECHNICAL DATA
Ambient temperature, °С:
-60...+40/+55
-20...+40/+55 (for mining equipment)
Coating:
Antistatic polymer-epoxy coating, frictionally intrinsically safe, resistant to operating environment and ionizing radiation. Color RAL 7035
Enclosure material:
Modified corrosion-resistant aluminum-silicon alloy, resistant to salt spray and other chemical substances including hydrogen sulfide and hydrochloric acid vapors, saline and acidic pit waters, frictionally intrinsically safe
Electric shock hazard protection class:
I
Climatic version:
NF1 (upon request NF2, NF3, NF4, NF5, F1, F2, F3, F5, T1, T2, T3, T5, MU1, MU2, MU3, MU4, W2.1, W5)
+
DIMENSIONS, OPTIONS, ACCESSORIES
MARKING
Heating for automation
/OBOGREV
Internal thermal insulation
/TEPLOIZOLJCIJA
External surface coating as per customer’s specification
/RAL (___)
Acceptance by customer
/PRIEMKA
Earthquake-resistant version
/MSK-64
Marine version
/MORE
Version for tropics with protection against bugs
/TERMITY
Drain plug for condensate removal
/DKUV
Anti-condensation coating
/AP
+
OVERALL AND MOUNTING DIMENSIONS
Габаритные и присоединительные размеры  ШГВА-ВРП

For explosion-proof mining version mining junction boxes with Exd type of protection are used.

Name Number of poles Rated current, A Dimension type of fuse-link Dimensions, mm (not including cable glands) Mass, kg:
A B C
SHGVA-VRP-3P-32-… 3 32 C… 235 235 164 8,5
SHGVA-VRP-3P+N-32-… 4 32 C… 235 235 164 8,5
SHGVA-VRP-3P-50-… 3 50 E… 276,5 276,5 218 12,5
SHGVA-VRP-4P-50-… 4 50 E… 276,5 276,5 218 12,5
SHGVA-VRP-3P-100-… 3 100 F… 276,5 276,5 218 12,5
SHGVA-VRP-4P-100-… 4 100 F… 429,5 429,5 291 36,6
SHGVA-VRP-3P-160-… 3 160 G… 429,5 429,5 291 36,6
SHGVA-VRP-4P-160-… 4 160 G… 429,5 429,5 291 36,6
+
FORMATION OF MARKING
SHGVA-VRP  -  X  -   -  Х  -  X  /  X  – TU 3400-005-72453807-07












                      Device type
                      Number of poles
                      Rated current of fuse-link
                      Type of fuse-link
                      Type of cable gland (side of location)
                      Options, accessories and versions

EXAMPLE OF ORDER: SHGVA-VRP-3P-250-HA1201-1KOV4(B)-1KNV5(G) – TU 3400-005-72453807-07
Explosion-proof switch-disconnector-fuse on the base of SHORVA enclosure, 3 poles, rated current 250 A with fuse-link 200A for protection against short circuit current with one cable gland for armored cable KOV4 on side B and one cable gland KNV5 on side D.

+
Fuse-links to circuit breakers-disconnectors-fuses 
Dimension type and type of fuse-link Rated voltage, V Rated current, A Protection against
short circuit overload
C… (cylindrical 10х38) ~ 500
0,16
0,25
СА001 -
0,25 СА002 -
0,5 СА005 -
1 СА01 -
2 СА02 СN02
4 СА04 СN04
6 СА06 СN06
8 СА08 СN08
10 СА10 СN10
12 СА12 СN12
16 СА16 СN16
~400 20 СА20 СN20
25 СА25 СN25
32 СА32 СN32
E… (cylindrical 14х51) ~690 0,25 ЕА002 -
0,5 ЕА005 -
~ 500 1 ЕА01 -
2 ЕА02 -
4 ЕА04 ЕN04
6 ЕА06 ЕN06
8 ЕА08 -
10 ЕА10 ЕN10
12 ЕА12 -
16 ЕА16 ЕN16
20 ЕА20 ЕN20
25 ЕА25 ЕN25
32 ЕА32 ЕN32
40 ЕА40 ЕN40
~ 400 50 ЕА50 ЕN50
F… (cylindrical 22х58) ~690 4 FА04 -
6 FА06 -
8 FА08 -
10 FА10 FN10
16 FА16 -
20 FА20 FN20
25 FА25 FN25
32 FА32 FN32
40 FА40 FN40
50 FА50 FN50
~ 500 63 FA63 FN63
80 FA80 FN80
100 FA100 FN100
G… (prismatic with knife blade contacts) ~ 500 50 GA1051 GN1051
63 GA1061 GN1061
80 GA1081 GN1081
100 GA1101 GN1101
125 GA1121 GN1121
160 GA1161 GN1161
H… (prismatic with knife blade contacts) ~ 500 160 HA1161 HN1161
200 HA1201 HN1201
250 HA1251 HN1251
J… (prismatic with knife blade contacts) ~ 500 250 JA1251 JN1251
315 JA1311 JN1311
400 JA1401 JN1401
K… (prismatic with knife blade contacts) ~ 500 400 KA1401 -
500 KA1501 KN1501
630 KA1631 KN1631
L… (prismatic with knife blade contacts) ~ 500 630 LA1631 -
800 LA1801 LN1801
1000 LA1101 LN1101
~ 400 1250 LA1251 LN1251
+
CONFORMITY TO STANDARDS IN RUSSIA
Table of names’ matching
Previous international name
"ZAVOD GORELTEX" Co. Ltd.

TU 3400-005-72453807-07
The Customs Union name
"ZAVOD GORELTEX" Co. Ltd.

TU 3400-005-72453807-07
CCA-VRP-3Р-32-… SHGVA-VRP-3P-32-…
CCA-VRP-3Р+Nc-32-… SHGVA-VRP-3P+N-32-…
CCA-VRP-3Р-50-… SHGVA-VRP-3P-50-…
CCA-VRP-4Р-50-… SHGVA-VRP-4P-50-…
CCA-VRP-3Р-100-… SHGVA-VRP-3P-100-…
CCA-VRP-4Р-100-… SHGVA-VRP-4P-100-…
CCA-VRP-3Р-160-… SHGVA-VRP-3P-160-…
CCA-VRP-4Р-160-… SHGVA-VRP-4P-160-…
CCA-VRP-3Р-250-… SHGVA-VRP-3P-250-…
CCA-VRP-4Р-250-… SHGVA-VRP-4P-250-…
+