Explosion-proof small-sized heating plates GTG-PLASTINA2 (RETO-PLATE-CAVO)

+
x
<
>
Explosion-proof small-sized heating plates GTG-PLASTINA2 (RETO-PLATE-CAVO)PURPOSE AND SCOPE OF APPLICATION

GTG-PLASTINA2 explosion-proof heating plates are intended for heating of flat and curved surfaces, such as reservoirs with petroleum products, containers, pipes surfaces, reservoirs with lubricants, heating of materials being refined, technological structures, hydraulic drives and joints of power devices etc.

Explosion-proof heating plates are manufactured from special heat-resistant rubber and are equipped with a built-in thermostat. It is recommended to apply PG-TERMOKLEY  sealant or PG-TERMOPASTA heat-conducting paste for better transmission of thermal energy.

GTG-PLASTINA2 explosion-proof heating plates shall be fastened directly to the heated surfaces of technological objects and structures and are intended for operation in the harshest operating conditions, where resistance of the equipment to wide temperature ranges, moisture and dust is required.

Scope of application – outdoor and indoor hazardous areas and pits non-hazardous with gas or dust, as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996), areas with presence of combustible dust, as per GOST IEC 61241-3-2011, dangerous production facilities of I, II, III, IV hazard class supervised by Rostechnadzor of the RF and national technical supervision bodies of the Customs Union and CIS countries.

+
CONFORMITY TO STANDARDS IN RUSSIA
ГОСТ Р МЭК 60079-0-2011, ГОСТ 14254-96 (МЭК 529-89), ГОСТ 30852.0-2002 (МЭК 60079-0:1998), ГОСТ Р МЭК 62086-1-2003, ГОСТ 30852.8-2002 (МЭК 60079-0:1998), ТР ТС 012/2011, ТР ТС 004/2011, ГОСТ IEC 61241-1-1-2011, ГОСТ 24754-2013, Гл. 7.3 ПУЭ, Гл. 7.4 ПУЭ, ГОСТ 30852.20-2002, ГОСТ Р МЭК 60079-31-2010
+
CERTIFICATES
Маркировка взрывозащиты Marking:
1Ex e IIC Т6...T3 Gb X
1Ex e IIC Т6...T3 Gb
Ex tb IIIC T80°C...T190°C Db X
Ex tb IIIC T80°C...T190°C Db
Protection:
+
TECHNICAL DATA
Ambient temperature, °С:
-60...+60
Maximum supply voltage, V:
~ 220 (50/60 Hz), 24
Power, W:
150, 300, 600
Power density, W/cm2:
0,3; 0,31; 0,32; 0,5
Insulation resistance, MOhn:
>100
Maximum temprerature of surface heating, °С:
80, 190
Operating position in space:
Any
Climatic version:
NF1 (upon request NF2, NF3, NF4, NF5, F1, F2, F3, F5, T1, T2, T3, T5, MU1, MU2, MU3, MU4, W2.1, W5)
+
DIMENSIONS, OPTIONS, ACCESSORIES
MARKING
Non-explosion-proof version
/PROM
+

Note : for option / GTG-PT , additionally specify the order code of the GTG-PT programmable thermostat.

+
OVERALL AND MOUNTING DIMENSIONS
Взрывозащищенные малогабаритные греющие пластины ГТГ-ПЛАСТИНА2
Model Size A, mm Size B, mm Power, W Temperature class (maximum heating temperature) Power density,
W/cm2
Supply voltage, V
GTG-PLASTINA2-150/T80 200 150 150 Т3 (Т80°C) 0,50 24
GTG-PLASTINA2-150/T190 220 220 150 Т3 (Т190°C) 0,31 230
GTG-PLASTINA2-300/T190 305 305 300 Т3 (Т190°C) 0,32 230
GTG-PLASTINA2-600/T190 305 610 600 Т3 (Т190°C) 0,32 230


График нагрева взрывозащищенной малогабаритной греющией пластины ГТГ-ПЛАСТИНА2

+
FORMATION OF MARKING
GTG-PLASTINA2 - Х / X - Х – TU 28.21.13-041-72453807-2017
Type of device
Power, W: 150; 300; 600
Maximum heating, °С: Т80, Т190
Options, accessories and versions

Example: GTG-PLASTINA 2-300/T190 -ТU 3400-007-72453807-07

+