Explosion-proof small-sized heating plates GTG-PLASTINA2 (RETO-PLATE-CAVO)

GTG-PLASTINA2 explosion-proof heating plates are intended for heating of flat and curved surfaces, such as reservoirs with petroleum products, containers, pipes surfaces, reservoirs with lubricants, heating of materials being refined, technological structures, hydraulic drives and joints of power devices etc.

Explosion-proof heating plates are manufactured from special heat-resistant rubber and are equipped with a built-in thermostat. It is recommended to apply PG-TERMOKLEY  sealant or PG-TERMOPASTA heat-conducting paste for better transmission of thermal energy.

GTG-PLASTINA2 explosion-proof heating plates shall be fastened directly to the heated surfaces of technological objects and structures and are intended for operation in the harshest operating conditions, where resistance of the equipment to wide temperature ranges, moisture and dust is required.

Scope of application – outdoor and indoor hazardous areas and pits non-hazardous with gas or dust, as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996), areas with presence of combustible dust, as per GOST IEC 61241-3-2011, dangerous production facilities of I, II, III, IV hazard class supervised by Rostechnadzor of the RF and national technical supervision bodies of the Customs Union and CIS countries.

CERTIFICATES

Marking:

1Ex e IIC Т6...T3 Gb X
1Ex e IIC Т6...T3 Gb
Ex tb IIIC T80°C...T190°C Db X
Ex tb IIIC T80°C...T190°C Db

Protection:

IP66/IP67

Certificates and permits:

ЕАЭС RU-C.RU.АД07.В.01824/20

ЕАЭС RU С-RU.МЛ02.В.00263/20

Maritime Register Type Approval Certificate  №20.08542.120

TU 3400-007-72453807-07

TU 28.21.13-041-72453807-2017

GOST R ISO 9001-2015 (ISO 9001:2015)

KZ39VEH00005608

TECHNICAL DATA

Ambient temperature, °С:

-60...+60

Maximum supply voltage, V:

~ 220 (50/60 Hz), 24

Power, W:

150, 300, 600

Power density, W/cm²:

0,3; 0,31; 0,32; 0,5

Insulation resistance, MOhn:

>100

Maximum temprerature of surface heating, °С:

80, 190

Operating position in space:

Any

Climatic version:

NF1 (upon request NF2, NF3, NF4, NF5, F1, F2, F3, F5, T1, T2, T3, T5, MU1, MU2, MU3, MU4, W2.1, W5)

DIMENSIONS, OPTIONS, ACCESSORIES, ORDER CREATION

OVERALL AND MOUNTING DIMENSIONS

Model	Size A, mm	Size B, mm	Power, W	Temperature class (maximum heating temperature)	Power density, W/cm2	Supply voltage, V
GTG-PLASTINA2-150/T80	200	150	150	Т3 (Т80°C)	0,50	24
GTG-PLASTINA2-150/T190	220	220	150	Т3 (Т190°C)	0,31	230
GTG-PLASTINA2-300/T190	305	305	300	Т3 (Т190°C)	0,32	230
GTG-PLASTINA2-600/T190	305	610	600	Т3 (Т190°C)	0,30	230

OPTIONS, ACCESSORIES AND VERSIONS

ORDER CREATION

Non-explosion-proof version

/PROM

Marine version

/MORE

Explosion-proof programmable thermostat

/GTG-PT

Note : for option / GTG-PT , additionally specify the order code of the GTG-PT programmable thermostat.

FORMATION OF ORDER

GTG-PLASTINA2	-	Х	/	X	-	Х	– TU 28.21.13-041-72453807-2017
							Type of device
							Power, W: 150; 300; 600
							Maximum heating, °С: Т80, Т190
							Options, accessories and versions

Example: GTG-PLASTINA 2-300/T190 -ТU 3400-007-72453807-07

CONFORMITY TO STANDARDS IN RUSSIA

GOST R IEC 60079-0-2011, GOST 14254-96 (IEC 529-89), GOST 30852.0-2002 (IEC 60079-0:1998), GOST R IEC 62086-1-2003, GOST 30852.8-2002 (IEC 60079-0:1998), TR CU 012/2011, TR CU 004/2011, GOST IEC 61241-1-1-2011, GOST 24754-2013, Ch. 7.3 PUE, Ch. 7.4 PUE, GOST 30852.20-2002, GOST R IEC 60079-31-2010