Explosion-proof equipment plant
Explosion-proof light fixtures SGL01...L for fluorescent lamps are intended for illumination of industrial premises, open production sites and other places, where explosive atmospheres may be present.
The body of explosion-proof fluorescent light fixtures SGL01...L is made from antistatic impact-resistant glassfiber reinforced polyester with transparent polycarbonate globe, which is fastened by stainless steel clamps. That is why the light fixtures are resistant to constant exposure to aggressive atmospheres, including hydrogen sulphide vapors, chemically resistant to operating environment and UV radiation. For the purpose of convenience and saving time for lamp replacement, the translucent panel of the fluorescent light fixture is fastened by latch locks, purpose-made non-sparking sockets are used.
Explosion-proof fluorescent light fixtures SGL01...L have feed-through and dead-end connection by means of a wire or a metal hose with wire cross-section up to 6 mm2 (with cable lug) and are additionally completed with cable glands. Non-sparking electronic ballast was developed for fast, reliable and careful lighting up of fluorescent lamps at temperatures below zero without flashing, with automatic function of disconnection of defective or faulty lamps.
A storage battery is used in explosion-proof fluorescent light fixtures SGL01...L for emergency lighting. Correct functioning of light fixture SGL01...L at temperatures below zero is confirmed by MTBF tests.
Scope of application – outdoor and indoor areas hazardous with gas as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996) and other codes regulating application of electrical equipment in hazardous areas.
Marking:
1Ex eb mb IIC T4 Gb 2Ex ec IIC T4 Gc РП Ex eb mb I Mc
TU 27.40.39-027-72453807-2017
| Model | Number of lamps | Size of light fixture | Type of lamp | Power, W |
Type of ballast | Voltage, V | Dimensions, mm | Mass, kg | |||
| A | B | C | M | ||||||||
| SGL01-118L | 1 | 18 | Fluorescent | 18 | electronic | ~190...230 V | 700 | 120 | 170 | 500 | 4 |
| SGL01-218L | 2 | 18 | Fluorescent | 2x18 | electronic | ~190...230 V | 700 | 120 | 170 | 500 | 4 |
| SGL01-136L | 1 | 36 | Fluorescent | 36 | electronic | ~190...230 V | 1335 | 120 | 170 | 800 | 7,3 |
| SGL01-236L | 2 | 36 | Fluorescent | 2x36 | electronic | ~190...230 V | 1335 | 120 | 170 | 800 | 7,3 |
| SGL01 | - | Х | Х | L | - | X | / | X | - | X | / | Х | – TU 27.40.39-027-72453807-2017 |
| Type of device | |||||||||||||
| Number of lamps: 1; 2 | |||||||||||||
| Light fixture size: 18; 36; | |||||||||||||
| Type of lamp: fluorescent - L | |||||||||||||
| Supply voltage: 220AC | |||||||||||||
| Type of mounting: ceiling mounting - P; pipe mounting - Т; suspension mounting (eye bolt) - R; wall mounting 45° - S45 |
|||||||||||||
| Number and dimension type of cable glands |
|||||||||||||
| Options, accessories and versions |
Example of order: SGL01-236L-220AC/P-2KNV2МNK/R/LAMPA-TU 27.40.39-027-72453807-2017
Datasheet for explosion-proof light fixtures and floodlights 
Archive of IES files for GORELTEX light fixturesCONNECTION
The connection is carried out by means of cable gland or pipe conduit.
Interactive selection of explosion-proof cable gland...>>
SELECTION OF FLUORESCENT LAMPS
Cold white
Color temperature: 4100 °K
Color rendering index (CRI) 70
Suitable for ambient lighting
Natural sunlight
Color temperature: 5000 °K
Color rendering index (CRI) 90
Suitable for ambient lighting
Specification 35/full spectrum
Color temperature: 3500–5000 °K
Color rendering index (CRI) 90
Good choice for operating area, where working with color marking is required
Daylight de luxe
Color temperature: 6500 °K
Color rendering index (CRI) 85
Suitable for ambient lighting of increased brightness
Cold white lamp (below) seems to be brighter, but daylight lamps with higher color temperature ensure pleasant light and better color rendering.
PICTURE |
DESCRIPTION |
MODEL |
CHARACTERISTICS |
|
Fluorescent lamp (upon order) |
18 W |
1350lm |
36 W |
3350lm |
||
 |
Eye bolt /R | Stainless steel | |
 |
Mounting bracket /P | Stainless steel | |
 |
Mounting bracket /S45 | Stainless steel | |
 |
Pipe mounting bracket /Т | Stainless steel | |
PHOTOMETRIC CURVES
CD/1000 LM
