Explosion-proof cable glands KNV (FEC) for non-armored cable

+
+
x
<
>
Explosion-proof cable glands KNV (FEC) for non-armored cablePURPOSE AND SCOPE OF APPLICATION

KNV explosion-proof cable glands for non-armored cable are used to secure the cable against accidental pulling out, used in places where explosion-proof cable glands with IP 66/67/68 are required.

The most important development is the use of one sealing ring for the whole range of diameters of crimped cable, which reliably crimps the incoming cable and ensures Exd type of protection. One sealing ring together with mandrel or cable withstand the force in newtons, which is equal to the twentyfold diameter value (in mm) of the mandrel or the cable. This helps to use KNV series explosion-proof cable glands without additional unloading of cable.

Increased wall thickness of the enclosures of GORELTEX cable glands considerably enhances their strength campared with cable glands of other manufacturers.

KNV explosion-proof cable glands may be used for cables with operating voltage over 3.3 kV.

KNV cable glands may be used for armored/braided cables. Sealing and earthing of braid is performed outside the cable gland. Internal cable sheath is to be inserted into cable gland. A32 earthing element is used to ensure earthing circuit continuity with metal enclosure and protection against electromagnetic disturbances.

Thanks to their design, KNV explosion-proof cable glands ensure cable unloading, protection against pulling out without causing damage to the structure of cable sheath  and conductors, as well as prevent cable overcompression.

Explosion-proof cable glands of KNV series are designed in Russia (Patent No. 155936, rightholder "ZAVOD GORELTEX" Co. Ltd. , operating characteristics of which significantly surpass Russian and foreign analogues.

Scope of application – underground mines and pits hazardous with gas (methane), coal dust; outdoor and indoor hazardous areas as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996), dangerous production facilities of I, II, III, IV hazard class supervised by Rostechnadzor of the RF and national technical supervision bodies of the Customs Union and CIS countries.

+
CONFORMITY TO STANDARDS IN RUSSIA
ГОСТ 14254-96 (МЭК 529-89), ГОСТ 30852.8-2002 (МЭК 60079-0:1998), ГОСТ 30852.14-2002, ГОСТ 30852.10-2002 (МЭК 60079-11:1999), ГОСТ 30852.20-2002, ГОСТ Р МЭК 60079-0-2011, ГОСТ IEC 60079-1-2011, ГОСТ 24754-2013, Гл. 7.3 ПУЭ, Гл. 7.4 ПУЭ, РД 5.2-093-2004, ТР ТС 004/2011, ТР ТС 012/2011, ГОСТ 12.2.007.0-75. ССБТ
+
CERTIFICATES
Маркировка взрывозащиты Marking:
1Ex db IIC Gb
1Ex e IIC Gb
Ex tb IIIC Db
1Ex db IIC Gb X*
1Ex e IIC Gb X*
Ex tb IIIC Db X*
*условия указаны в руководстве по эксплуатации *conditions are specified in the operating instructions
Mining equipment marking:
РВ Ex db I Mb
РП Ex e I Mc
РН1, РН2
+
TECHNICAL DATA
Ambient temperature, °С:
-60…+130
-75…+130 (for /HOLOD)
-60…+185 (for /TERMO)
-60…+130 (for РН1, РН2)
Material:
Nickel-plated brass resistant to vapor of hydrogen sulphide, hydrochloric acid and sea fog, NK code
Stainless steel grade 08Х18Н10 as per GOST 5632-2014 (AISI 304) N code
Climatic version:
NF1 (upon request NF2, NF3, NF4, NF5, F1, F2, F3, F5, MU1, MU2, MU3, MU4, W2.1, W5)
+
DIMENSIONS, OPTIONS, ACCESSORIES
MARKING
Non-explosion-proof version
/PROM
Stainless steel grade 03Х17Н13М2 as per GOST 5632-2014 (316L)
/316L
Marine version
/MORE
Protective plug (for closing of unused cable gland)
/VZK
External seal for ingress protection (IP) on thread (cylindrical and metric thread)
/UKF
Locknut (cylindrical and metric thread)
/KG
Grounding ring
/A31
Additional sealing ring for extension of the crimped cable diameter range
/R
+
OVERALL AND MOUNTING DIMENSIONS
Габаритные и присоединительные размеры KNV
KNV explosion-proof cable glands, metric thread GOST 24705 Metric
Cable gland dimension type Thread Dimensions, mm Diameter of crimped cable, mm Mass, kg
Main Alternative АС1 АС2 ØМ С
KNV02M FEC02I М12х1,5 24 24 26 55,5 3-7 0,098
KNV01M FEC01I M16х1,5 24 24 26 55,5 3-8 0,108
KNV1M FEC1I M20x1,5 26 26 28,5 53,5 6-12 0,115
KNV1M.../Р FEC1I.../R M20x1,5 26 26 28,5 53,5 3-12 0,115
KNV1M.../PR30 FEC1I.../PR30 M20x1,5 26 26 28,5 67,5 6-12 0,141
KNV2M FEC2I M25x1,5 34 34 38 59,5 12-18 0,194
KNV2M.../Р FEC2I.../R M25x1,5 34 34 38 59,5 6-18 0,194
KNV2M.../PR30 FEC2I.../PR30 M25x1,5 34 34 38 73,5 12-18 0,232
KNV3M FEC3I M32x1,5 40 40 44,5 71 18-25 0,26
KNV3M.../P FEC3I.../R M32x1,5 40 40 44,5 71 12-25 0,26
KNV3M.../PR30 FEC3I.../PR30 M32x1,5 40 40 44,5 78,5 18-25 0,304
KNV4M FEC4I M40x1,5 50 50 56 67,5 25-31 0,39
KNV4M.../Р FEC4I.../R M40x1,5 50 50 56 67,5 18-31 0,39
KNV4M.../PR30 FEC4I.../PR30 M40x1,5 50 50 56 75 25-31 0,448
KNV5M FEC5I M50x1,5 57 60 67 71 31-39 0,544
KNV5M.../PR30 FEC5I.../PR30 M50x1,5 57 60 67 78,5 31-39 0,645
KNV6M FEC6I M63x1,5 68 70 77 78 39-47 0,883
KNV7M FEC7I M75x1,5 80 75 88 81 47-55 1,047
KNV71M FECS7I M75x1,5 82 78 90 85 55-63 0,892
KNV8M FEC8I M90x1,5 95 90 105 84 63-71 1,324
KNV81M FECS8I M90x1,5 102 98 110 87 71-79 1,319
KNV10M FEC10I M100x1,5 115 110 122 93 79-87 1,867
KNV101M FECS10I M100x1,5 120 115 128 103 84-92 2,15

KNV explosion-proof cable glands, taper inch thread NPT
Cable gland dimension type Thread Dimensions, mm Diameter of crimped cable, mm Mass, kg
Main Alternative АС1 АС2 ØМ С
KNV02N FEC02N 1/4" 24 24 26 56 3-7 0,1
KNV01N FEC01N 3/8" 24 24 26 56 3-8 0,117
KNV1N FEC1N 1/2" 26 26 28,5 56 6-12 0,127
KNV1N.../P FEC1N.../R 1/2" 26 26 28,5 56 3-12 0,127
KNV2N FEC2N 3/4" 34 34 38 62 12-18 0,219
KNV2N.../P FEC2N.../R 3/4" 34 34 38 62 6-18 0,219
KNV3N FEC3N 1" 40 40 44,5 71 18-25 0,297
KNV3N.../P FEC3N.../R 1" 40 40 44,5 71 12-25 0,297
KNV4N FEC4N 1 1/4" 50 50 56 67,5 25-31 0,445
KNV4N.../P FEC4N.../R 1 1/4" 50 50 56 67,5 18-31 0,445
KNV5N FEC5N 1 1/2" 57 60 67 72 31-39 0,561
KNV6N FEC6N 2" 68 70 77 81 39-47 0,922
KNV7N FEC7N 2 1/2" 80 75 88 90 47-55 1,277
KNV71N FECS7N 2 1/2" 82 78 90 93 55-63 1
KNV8N FEC8N 3" 95 90 105 93 63-71 1,612
KNV81N FECS8N 3" 102 98 110 95 71-79 1,47
KNV10N FEC10N 4" 115 110 122 105 79-87 2,56
KNV101N FECS10N 4" 120 115 128 111 84-92 2,88
+
АВТОМАТИЧЕСКОЕ ФОРМИРОВАНИЕ ЗАКАЗА

Диаметр обжимаемого кабеля, мм:
Tип резьбы кабельного ввода:
Размер резьбы кабельного ввода:
Тип резьбы для внешнего присоединения:
Материал кабельного ввода:
Добавить присоединительный переходник:
Размер присоединительной резьбы переходника:
Материал переходника:
+
FORMATION OF MARKING
KNV   X   Х   Х  /  Х  – TU 3400-007-72453807-07
                  Cable gland type
                  Dimension type
                  Type of thread: Taper inch NPT - N; Metric GOST 24705 - M;
Taper pipe GOST 6211-81 - R; Pipe cylindrical GOST 6357-81 - G
                  Material of cable gland: Nickel-plated brass - NK, Stainless steel - N
                  Options, accessories and versions

Example:
KNV1MNK -TU 3400-007-72453807-07
- Cable type: non-armored
- Thread: М20x15, metric ISO965
- material: nickel-plated brass
KNV3NH/316L - TU 3400-007-72453807-07
- Cable type: non-armored
- Thread: 1" taper inch thread NPT
- Thread: stainless steel 03Х17Н13М2 as per GOST 5632-2014 (AISI 316L)
+
+