Explosion-proof equipment plant
| Certification | |
 Explosion protection marking: |
 Ex d e IIC Gb U Ex tb IIIC Db U |
| Ingress protection: | IP66 |
| Electrotechnical data: |  24 V; 0,2 А |
| Ambient temperature, °С: | -40...+60 |
| Type | Picture | Description |
| KGE12 |  |
Piezo buttons |
| Certification | |
| Explosion protection marking: |
 Ex d IIC Gb U Ex d e IIC Gb U |
| Ingress protection: | IP66/68 |
| Electrotechnical data: | 380 V; 10 А |
| Ambient temperature, °С: | -60...+125 |
| Type | Picture | Description |
| TERMODATCHIK-2 |  | Thermoelement for outside temperature control |
| Certification | |
| Explosion protection marking: |
Ex d [ib] IIC Gb U Ex d [ib] I Mb U |
| Ingress protection: | IP66/68 |
| Electrotechnical data: |
Uo = 6,93 В; Io = 2,12 А Co = 15,7 мкФ; Lo = 0,008 мГн |
| Ambient temperature, °С: | -60...+125 -20...+125 (for mining version) |
| Type | Picture | Description |
| Termodatchik-IP |  |
Thermal sensor Termodatchik-IP/101-А1 Actuation temperature: 54...64 °С |
| Thermal sensor Termodatchik-IP/101-А2 Actuation temperature: 54...70 °С |
||
| Thermal sensor Termodatchik-IP/101-А3 Actuation temperature: 64...76 °С |
||
| Thermal sensor Termodatchik-IP/101-В Actuation temperature: 69...85 °С |
||
| Thermal sensor Termodatchik-IP/101-С Actuation temperature: 84...100 °С |
||
| Thermal sensor Termodatchik-IP/101-D Actuation temperature: 99...115 °С |
||
| Thermal sensor Actuation temperature as per customer‘s specification |
| Certification | |
| Explosion protection marking: |
Ex d IIC Gb U Ex d e IIC Gb U |
| Ingress protection: | IP66/68 |
| Electrotechnical data: | Ur= ~380 V, Ir=4 А, f=50 Hz Ur= ~220 V, Ir=10 А, f 50 Hz Ur=  30 V, Ir=10 А |
| Ambient temperature, °С: | -60...+75/+90/+125 |
| Type | Picture | Description |
| TERMODATCHIK-1 |  |
Thermostat |
| Certification | |
| Explosion protection marking: |
for PSGV01, PSGV02: Ex db e mb IIC Gb U; Ex tb IIIC Db U Ex db e mb I Mb U* for PSG02-12.../ИБ: Ex db ib IIC Gb U; Ex tb ib IIIC Db U Ex db ib I Mb U*for PSGVE01: Ex e mb IIC Gb U; Ex tb IIIC Db U
*Marking for sirens, the shell material of which contains by weight no more than 15% (in total) aluminum, magnesium, titanium, zirconium and 7.5% (in total) magnesium, titanium and zirconium.. |
| Ingress protection: | IP66/69, IK10 |
| Electrotechnical data: |
⎓12 V; 0,15 А (for PSGV01, PSGV02) ⎓12 V; 0,09 А (for PSG02-12.../IB) |
| Characteristics of the IS Barrier: |
PSG02-12.../IB: Uo= 13,86 V; Io=1,22А; Co=0,74 µF; Lo=0,mHz |
| Ambient temperature, °С: |
-60...+60 (for PSGV01, PSGV02) -40...+40 (for PSG02-12.../IB) -60...+60 (for PSGЕ01, PSGV-МТ) |
| Type | Picture | Description |
| PSGV01 |  |
Piezosiren 106 dB, 3/4" R (any other thread through adapter) |
| PSG02 | Piezosiren 102 dB, 3/4" R (any other thread through adapter) |
|
| PSGV02 PSGV02-MT |
 |
Piezosiren 108 dB, М75х1,5 |
| PSGE01 |  |
Piezosiren 108 dB, (installed in the enclosure with Exe type of protection) |
Note: PSGV01 and PSG02 explosion-proof piezo sirens should be operated with the acoustic holes turned down.
PSGV02 may be operated in any position, except in the case when acoustic holes are turned up.
Specified when ordering.
