Explosion-proof sockets RGM (PY)

RGM explosion-proof sockets and VGM plugs are stationary devices and are intended for switching of electrical circuits at different industrial facilities. RGM explosion-proof sockets are intended for connection of portable equipment: portable lamps, measuring devices, storage batteries, pumps, fans, air blowers, compressors, generators and other non-stationary and portable devices, ampere capacity of which does not exceed 32 A.

RGM explosion-proof sockets are manufactured with a disconnector with an interlock, may be applied at the facilities, where potentially hazardous atmosphere is present, as well as at different industrial facilities. The socket is switched on by input of a plug and turning it to 45°, which allows the internal switch to close. The switch turns off only when VGM plug is plugged in. Plug can be extracted from the socket only when switch is in OFF position. RGM sockets are very ergonomic, quickly installed and reliable in operation. The sockets have self-cleaning and calibrated contacts.

According to IEC standard, sockets for different voltage, frequency, current and number of poles are impossible to connect. The grounding receptacle position to the guide is different for different voltage and frequency. In order to distinguish devices for different voltage and frequency, color coding is applied, as well as socket dimensions vary depending on the rated current values. Contacts and receptacles are located in a different way in IEC system in sockets with different number of poles and contacts, ground contact and its receptacle are bigger than other contacts and receptacles. All this is made to increase safety. VGM plug is fully compatible with dustproof-and-moistureproof socket as per IEC 60309 standard and helps to connect to general industrial socket, which enables to expand scope of application of equipment with VGM plugs. The products are highly resistant to hydrogen sulfide exposure, which is proven in written form in TR CU certificates. Flameproof joint service life is more than 25 years.

Scope of application – outdoor and indoor hazardous areas as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996), areas with presence of combustible dust, as per GOST IEC 61241-3-2011, dangerous production facilities of I, II, III, IV hazard class supervised by Rostechnadzor of the RF and national technical supervision bodies of the Customs Union and CIS countries.

VGM (SPY) explosion-proof plugs

CERTIFICATES

Marking:

1Ex db IIC T6...T4 Gb
Ex tb IIIC T60°С...T135°С Db

Protection:

IP66/IP67/IP68

Certificates and permits:

ЕАЭС RU С-RU.АЖ58.В.06602/24

IECEx CCVE 18.0011X

EESF 19 ATEX 024X

ЕАЭС RU C-RU.МЛ02.В.00318/21

Морской регистр СТО №23.44.01.09007.120

RU.OC BCCT 0180-11-2023

TU 3400-005-72453807-07

TU 27.33.13-042-72453807-2017

GOST R ISO 9001-2015 (ISO 9001:2015)

KZ39VEH00005608

TECHNICAL DATA

Ambient temperature, °С:

-60...+60 (T6/T85°C)
-60...+75 (T5/T100°C)
-60...+85 (T4/T135°C)
-60...+85 (general industrial version)

Maximum voltage, V:

690

Maximum current, A:

32

Connection:

Direct connection to wire terminals with 2.5-4 mm cross-section² (for RGM-16), 4-6 mm² (for RGM-32)

Thread on connecting holes:

Metric GOST 24705-2004

Coating:

Antistatic polymer epoxy coating, frictionally intrinsically safe, resistant to operating environment and ionizing radiation. Color RAL 7035

Enclosure material:

Modified corrosion-resistant aluminum-silicon alloy, resistant to salt spray and other chemical substances, including hydrogen sulfide and hydrochloric acid fumes, salty and acidic mine waters, frictionally intrinsically safe

Electric shock hazard protection class:

I

Climatic version:

NF1 (upon request NF2, NF3, NF4, NF5, F1, F2, F3, F5, MU1, MU2, MU3, MU4, W2.1, W5)

DIMENSIONS, OPTIONS, ACCESSORIES, ORDER CREATION

OVERALL AND MOUNTING DIMENSIONS

Type	Current, A	Voltage, V	Number of poles	Color	Dimensions, mm						Mounting dimensions			Mass, kg
					ØA	E	Y	B	C	ØD	X	F	ØW
RGM-16-130-2	16	130	2P+PE	yellow	105	24	145	215	155	2 х M25x1,5	52	105	7	1,68
RGM-16-130-3	16	130	3P+PE	yellow
RGM-16-130-4	16	130	3P+N+PE	yellow	125	31	180	254	182	2хM32x1,5	75	140	9	2,67
RGM-16-24-2	16	12/24	2P+PE	violet	105	24	145	215	155	2 х M25x1,5	52	105	7	1,68
RGM-16-250-2	16	250	2P+PE	blue
RGM-16-250-3	16	250	3P+PE	blue
RGM-16-415-3	16	415	3P+PE	red
RGM-16-250-4	16	250	3P+N+PE	blue	125	31	180	254	182	2 х M32x1,5	75	140	9	2,67
RGM-16-415-4	16	415	3P+N+PE	red
RGM-32-250-2	32	250	2P+PE	blue
RGM-32-250-3	32	250	3P+PE	blue
RGM-32-415-3	32	415	3P+PE	red
RGM-32-250-4	32	250	3P+N+PE	blue
RGM-32-415-4	32	415	3P+N+PE	red
RGM-16-500-3	16	500	3P+PE	black	105	24	145	215	155	2 х M25x1,5	52	105	7	1,68
RGM-16-690-3	16	690	3P+PE	black
RGM-16-500-4	16	500	3P+N+PE	black	125	31	180	254	182	2х M32x1,5	75	140	9	2,67
RGM-16-690-4	16	690	3P+N+PE	black
RGM-32-500-3	32	500	3P+PE	black
RGM-32-500-4	32	500	3P+N+PE	black
RGM-32-690-3	32	690	3P+PE	black
RGM-32-690-4	32	690	3P+N+PE	black

OPTIONS, ACCESSORIES AND VERSIONS

ORDER CREATION

Fastening bracket

/SKOBA

Marine version

/MORE

Non-explosion-proof version

/PROM

Earthquake-resistant version

/MSK-64

FORMATION OF ORDER

RGM

-

X

-

X

-

X

-

X

/

/

X

– TU 27.33.13-042-72453807-2017

Device name

Current , А: 16; 32

Maximum voltage, V: 12/24 - 24; 250; 415

Number of poles: 2P+PE - 2; 3P+PE - 3; 3P+N+PE - 4

The quantity and type of cable entries

Options, accessories and versions

Example: RGM-16-250-3-1KBV2MNK/MORE–ТU 27.33.13-042-72453807-2017

TABLE OF NAMES' MATCHING

Previous international name "ZAVOD GORELTEX" Co. Ltd.   TU 3400-005-72453807-07	The Customs Union name "ZAVOD GORELTEX" Co. Ltd. TU 3400-005-72453807-07
PY216B	RGM-16-250-2
PY316B	RGM-16-250-3
PY316R	RGM-16-415-3
PY232B	RGM-32-250-2
PY332B	RGM-32-250-3
PY332R	RGM-32-415-3
PY432B	RGM-32-250-4
PY432R	RGM-32-415-4

CONFORMITY TO STANDARDS IN RUSSIA

GOST R IEC 60079-0-2011, GOST 14254-96 (IEC 529-89), GOST 30852.0-2002 (IEC 60079-0:1998), GOST R IEC 60079-31-2010, GOST 30852.1-2002 (IEC 60079-1:1998), GOST IEC 61241-1-1-2011, TR CU 012/2011, Ch. 7.3 PUE, Ch. 7.4 PUE