Explosion-proof linear LED light fixtures series SGL01...S

PURPOSE AND SCOPE OF APPLICATION

Explosion-proof linear LED light fixtures SGL01-...S are intended for illumination of industrial premises, open production sites and other places, where explosive atmospheres may be present.

The body of light fixtures is made from antistatic impact-resistant glassfiber reinforced polyester with globe made from non-inflammable transparent polycarbonate, which is fastened by stainless steel clamps. That is why explosion-proof LED light fixtures series SGL01...S are resistant to aggressive atmospheres, including hydrogen sulphide vapors, chemically resistant to operating environment and UV radiation. For the purpose of convenience and saving time for lamp replacement, the translucent panel of the explosion-proof light fixture is fastened by latch locks.

Explosion-proof linear LED light fixtures series SGL01...S have feed-through and dead-end connection by means of a wire or a metal hose with wire cross-section up to 6 mm2 (with cable lug) and are additionally completed with cable glands.

Correct functioning of LED light fixture SGL01...S under negative temperatures is confirmed by MTBF tests. Structural features of explosion-proof LED light fixtures SGL01...S and materials used for their manufacturing enable to continuously protect LEDs from the exposure of aggressive chemical substances at the customer‘s sites during the whole period of operation.

Explosion-proof LED light fixtures series SGL01-2480S and SGL01-4960S in IBP version are completed with UPS built in the light fixture body. The period of operation in the emergency mode is 1-1.5 hours with all matrix LEDs emitting light, as in the normal mode.

Manufacturing of explosion-proof LED light fixtures series SGL01 from stainless steel resistant to high temperatures and corrosion is possible.

Scope of application – outdoor and indoor areas hazardous with gas as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996) and other codes regulating application of electrical equipment in hazardous areas.

CERTIFICATES

Marking:

1Ex eb mb op is IIC T5...T4 Gb

Ex tb op is IIIC T85…T105°C Db

2Ex ec op is IIC T5...T4 Gc

Mining equipment marking:

РП Ex db eb mb op is I Mc

РП Ex eb mb op is I Mc
РН1/РН2

Protection:

IP54/IP66

TECHNICAL DATA

Ambient temperature, °С:

-40…+55
-40 …+70 (for /TERMO)
-20…+60 (for mine versions)

Rated voltage, V:

12DC, 36DC, 220DC,
36AC, 220AC

Current consumption, A:

SGL01-2480S: 1,54…0,51 (10…36 DC); 0,11…0,073 (170…270 AC/DC); 0,9...0,5 (21...42 АС); 1...0,5 (21...42 DC);
SGL01-4960S: 0,2…0,14 (180…270 AC/DC); 1,8...0,9 (21...42 АС); 1,9...0,9 (21...42 DC)

Consumed power, W:

SGL01-2480S: 18;
SGL01-4960S: 36

Enclosure material:

Antistatic impact-resistant glassfiber reinforced polyester, chemically resistant to operating environment and UV radiation. Globe - non-inflamable transparent polycarbonate, resistant to UV radiation.

Maximum luminous flux of light source, lm:

2480, 4960

Correlated color temperature, K:

5000 or 4000 (for /4000К)

Luminous flux pulsation coefficient:

no more3% (для SGL01-2480S)
no more 1% (для SGL01-4960S)

Electric shock hazard protection class:

Climatic version:

NF1 (upon request NF4, NF5, T1, T2, T3, T5, F5, MU1, MU2, MU3, MU4, W5)

IES files:

SGL01-2480S, 220 V
SGL01-4960S, 220 V

DIMENSIONS, OPTIONS, ACCESSORIES, ORDER CREATION

OVERALL AND MOUNTING DIMENSIONS

Чертеж взрывозащищенного светодиодного светильника СГЛ01

Explosion-proof linear LED light fixtures series SGL01...S

Model

Power, W

Maximum luminous flux of light source, lm

Ex marking

SGL01-2480S

2480

Gas-Dust-Mine

Details

Rated voltage, V (current consumption, A)

10...36 DC (1,54...0,51 А);
1...0,5 A (21...42 DC);
170...270 DC (0,11...0,073 А);

21...42 АС (0,9...0,5 A);
170...270 AC (0,11...0,073 А);

Size, mm

A - 700; B - 120; C - 170; M - 500

Mass, kg

3,5

Ex-marking and ambient temperature

Gas

1Ex e mb s IIC Т4 Gb
2Ex nA IIC T4 Gc
1Ex e mb s IIC Т5 Gb
2Ex nA IIC T5 Gc

-40...+55
-40...+55
-40...+40
-40...+40

Dust

Ex tb IIIC T100°С Db
Ex tb IIIC T185°С Db

-40...+55
-40...+40

SGL01-4960S

4960

Gas-Dust-Mine

Details

Rated voltage, V (current consumption, A)

21...42 DC (1,9...0,9 A);
180...270 DC (0,2...0,14 А);

21...42 АС (1,8...0,9A);
180...270 AC (0,2...0,14 А);

Size, mm

A - 1335; B - 120; C - 170; M - 800

Mass, kg

5,2

Ex-marking and ambient temperature

Gas

1Ex eb mb op is IIC T4 Gb
2Ex ec op is IIC T4 Gc
1Ex eb mb op is IIC T5 Gb
2Ex ec op is IIC T5 Gc

-60…+60
-60…+60
-40…+45
-40…+45

Dust

Ex tb op is IIIC T105°С Db
Ex tb op is IIIC T100°С Db
Ex tb op is IIIC T90°С Db
Ex tb op is IIIC T85°С Db

-60…+60
-40…+55
-40…+45
-40…+40

Mine

РП Ex eb mb op is I Mc

-20…+60

Explosion-proof linear LED light fixtures series SGL01...S/...TERMO

Model

Power, W

Maximum luminous flux of light source, lm

Ex marking

SGL01-2480S.../TERMO

2480

Gas

Details

Rated voltage, V (current consumption, A)

12…36 DC (1,54…0,51 A)

170…270 AC (0,11…0,073 A);

Size, mm

A - 700; B - 120; C - 170; M - 500

Mass, kg

3,5

Ex-marking and ambient temperature

Gas

2Ex ec op is IIC T4 Gc

-40...+70

SGL01-4960S.../TERMO

4960

Gas

Details

Rated voltage, V (current consumption, A)

170…270 AC (0,2…0,14 A)

Size, mm

A - 1335; B - 120; C - 170; M - 800

Mass, kg

5,2

Ex-marking and ambient temperature

Gas

2Ex ec op is IIC T4 Gc

-40...+70

Explosion-proof linear LED light fixtures series SGL01...S/IBP

Model

Power, W

Maximum luminous flux of light source, lm

IBP operation time, h / IBP charging time, h

Ex marking

SGL01-2480S.../IBP

2480

1-1,5 / 3-6

Gas

Details

Rated voltage, V

215...230 AC

Current consumption without heating, A

0,183...0,174

Current consumption with heating, A

0,375…0,400

Size, mm

A - 700; B - 120; C - 170; M - 500

Mass, kg

3,5

Ex-marking and ambient temperature

Gas

1Ex eb mb op is IIC T4 Gb
2Ex ec op is IIC T4 Gc
1Ex eb mb op is IIC T5 Gb
2Ex ec op is IIC T5 Gc

-40…+55
-40…+55
-40…+40
-40…+40

SGL01-4960S.../IBP

4960

1-1,5 / 3-6

Gas-Mine

Details

Rated voltage, V

215...230 AC

Current consumption without heating, A

0,340...0,323

Current consumption with heating, A

0,632…0,665

Size, mm

A - 1335; B - 120; C - 170; M - 800

Mass, kg

5,2

Ex-marking and ambient temperature

Gas

1Ex eb mb op is IIC T4
2Ex ec op is IIC T5 Gc
1Ex eb mb op is IIC T5 Gb
2Ex ec op is IIC T5 Gc

-40…+55
-40…+55
-40…+40
-40…+40

Mine

Ex tb op is IIIC T85°C Db

-40…+55

OPTIONS, ACCESSORIES AND VERSIONS

ORDER CREATION

Explosion-proof uninterruptible power supply (x - capacity of rechargeable battery)

/IBPx

Version for high temperatures

/TERMO

Marine version

/MORE

Non-explosion-proof version

/PROM

Seismic impact

/VSUx

Earthquake-resistant version

/MSK-64

Mine normal execution

/RN

Color temperature of LEDs

/4000K

Blue light-emitting LEDs

/SINIY SVET

Green light-emitting LEDs

/ZELENIY SVET

Protection against unauthorized access

/SZD

Light fixture preservation

/KONSERVACIJA

Electric shock protection class II (for polyester only)

/KZCH2

Note: Option /VSUх is available for SGL01-4960S/Т light fixture.

FORMATION OF ORDER

SGL01

– TU 27.40.39-027-72453807-2017

Type of device

Luminous flux, lm: 2480; 4960

Type of lamp: LED matrix - S

Supply voltage: 12DC, 36AC, 36DC, 220AC, 220DC;

Type of mounting: ceiling mounting - P; pipe mounting - Т;
suspension mounting (eye-bolt) - R; wall mounting 45° - S45

Number and dimension type of cable glands

Options, accessories and versions

Example of order: SGL01-4960S-220AC/P-2KNV2МNK/R - TU 27.40.39-027-72453807-2017

Datasheet for explosion-proof light fixtures and floodlights

Archive of IES files of GORELTEX light fixtures

CONNECTION

The connection is carried out by means of cable gland or pipe conduit.
Interactive selection of explosion-proof cable gland...>>

**Accessories and spare parts**
PICTURE	DESCRIPTION	MODEL	CHARACTERISTICS
	Eye-bolt /R		Stainless steel
	Mounting bracket /P		Stainless steel
	Mounting bracket /S45		Stainless steel
	Mounting bracket on pipe /Т		Stainless steel

ADDITIONAL INFORMATION

PHOTOMETRIC CURVES
CD/1000 LM

SGL01-2480S

Фотометрическая кривая взрывозащищенного светодиодного светильника СГЛ01-2480С

SGL01-4960S

Фотометрическая кривая взрывозащищенного светодиодного светильника СГЛ01-4960С

TABLE OF NAMES' MATCHING

Previous name "ZAVOD GORELTEX" Co. Ltd. TU 3400-006-72453807-07	New name "ZAVOD GORELTEX" Co. Ltd. TU 3400-006-72453807-07
SGL01-118/LSM	SGL01-2480S
SGL01-218/LS
SGL01-136/LS
SGL01-218/LSM	SGL01-4960S
SGL01-236/LS
SGL01-136/LSM

CONFORMITY TO STANDARDS IN RUSSIA

GOST R IEC 60079-0-2011, GOST 30852.0-2002 (IEC 60079-0:1998), GOST 30852.8-2002 (IEC 60079-0:1998), GOST 30852.17-2002 (IEC 60079-18:1992), GOST R IEC 60079-31-2010, GOST 22782.3-77, GOST 30852.14-2002, TR CU 004/2011, TR CU 012/2011, TR CU 020/2011, GOST 30852.20-2002, GOST 24471-80, GOST R 53320-2009

St. Petersburg

Explosion-proof linear LED light fixtures series SGL01...S

CERTIFICATES

TECHNICAL DATA

DIMENSIONS, OPTIONS, ACCESSORIES, ORDER CREATION

ADDITIONAL INFORMATION

TABLE OF NAMES' MATCHING

CONFORMITY TO STANDARDS IN RUSSIA

КНВ

КОВ

КНЕП

CALL US

ABOUT ZAVOD GORELTEX